No other tape protects your bike frame like Shelter
Shelter Bike Frame Protection Tape
On impact, Shelter deforms, which decreases the force (force=impulse/time) while also distributing the force over a greater area, thus decrease the force per square inch. After impact, the Shelter protection tape returns to the normal resting state.
Shelter Impact Protection Video
The purpose of the video was to demonstrate the effectiveness of Shelter in dispersing the force of an impact. The reason we used a fluorescent bulb was because the fluorescent bulb would explode when it broke. This is considerably more dramatic than internal damage to a carbon fiber down tube that might, or might not, be visible. A fluorescent tube made for a better video and it clearly shows that Shelter is pretty effective in diminishing impacts.
Shelter is NOT a shield of invulnerability. Nothing is going to protect you against every hit. But Shelter will diminish the force of every impact better than anything else that's on the market.
Watch the Shelter Test Video in HD on YouTube
Shelter Frame Protection Package Includes
- Two 55mm X 500mm (2" x 20") strips of Shelter.
Need more than 2 strips? For riders who want to set-up multiple bikes for which two strips aren't sufficient, we recommend the "Shop Roll" a 55 mm x 5 m strip of Shelter to use anywhere in any configuration you need.
Zinn calls Shelter Perfect
From the Forums:
"Shelter is the best. Try it. I am a shop guy and I have witnessed it saving my personal rig during a crash. Perfect for downtube on shuttle bikes, saves paint and frame. Super tacky, but easily removable. Works on stays. 100% recommended."
What is Shelter and how does it protect my bicycle frame?
Shelter is the first product of it's kind, providing both abrasion and shock protection for any frame. It's a visco-elastomeric material-like a memory foam, with 50 layers of energy-absorbing netting, that absorbs energy before it gets through to the frame. Shelter will diminish every impact.
"As we see it, there's no downside to using Shelter on cyclo-cross and road bikes—it's cheap insurance against the unforeseen, while not tarnishing the bikes aesthetics." - Road Bike Action http://www.roadbikeaction.com/fly.aspx?layout=content&taxid=67&cid=6881
Why Shelter bicycle frame protection medium / tape?
There are many abrasion resistant products, like "Helicopter tape" or "duct tape" but none of them provide shock absorption. Shelter is the first shock absorption and abrasion resistant bicycle frame protection product of its type.
Other protection tapes will work to protect your frame from impact. Anything is better than nothing, however: (a) If the protection medium is too hard, impact force is transmitted through the protection medium to the frame; (b) If the protection medium is too soft, the medium is pushed out of the way and the impact force is directly imparted to the frame.
Shelter is just right, and better than anything else out there. Shelter is specifically designed, with its 50 layers of energy-absorbing netting, and an optimized density, to diminish and withstand the real world impacts of stones that could cause damage that you're likely to receive as stones are thrown up against the down tube.
Shelter is also pretty much invisible so your bike graphics are not hidden from the world. It contains a small logo that is nearly invisible.
Does Shelter protect aluminum, Ti, steel, and bamboo frames?
Yes, you can use it to protect any bike. But it was specifically created to mitigate the exposure carbon frames have to this particular kind of damage. It also works well to decrease noise from chain slap, protect chain stays, and any other impact area.
The adhesive is fantastic and moulds to any shape and stays there. We tested it on the down tube, chainstays and under cables. For cable rub it seems overkill at 1.2mm but it works, and the chainstay piece stays in place and does a good job too. Russell Burton Bike Radar
Where can Shelter be used to protect the bicycle frame?
Great places for a Shelter Impact Absorption Strip:
- underside of down tubes
- chain stays
- along head tubes to protect from cable housing abrasion and the sound of the housing slapping against the tubes.