Caffelatex Tubeless Conversion Kit (RACE)

Tubeless Conversion Kit Tech Video

In this Caffélatex Tubeless Conversion KIT Tech Video, Effetto Mariposa showcases a tubeless conversion for home mechanics.

Compatible Tire Types

The Caffélatex Tubeless Kit has been developed for Tubeless, Tubeless-Ready, TNT (Tube No Tube) and 2Bliss mountain bike tires, manufactured according to the UST fitting diameter.

Notice: the use of a Caffélatex Tubeless Kit with standard tube-type tyres is done under the user's sole responsibility.

External Width of the Rim Section determines Tape Width

Caffelatex Race Tape is for rims with an external section from 22 to 25mm (for example: MavicXC717, XM719, American Classic 350, DT4,1, DT4,2, Notubes Olympic, ZTR355, Arch, FRMXMD333, etc...)

Caffelatex Heavy-Duty Tape is for rims with and external section from 25 to28mm (for example: Mavic EX721, Notubes Flow, etc...)

Kit requires the Rims to be Drilled for Presta Valves

In order to use the kit successfully the wheels / rims must be PRESTA-DRILLED (1/4" valve hole). NO SCHRADER VALVE HOLES (21/64" valve hole).

Tire Size determines Amount of Caffelatex to Use

It depends upon your tire size and brand. We suggest the following amounts of Caffelatex:

The above figures are some good starting points. Not all tire sizes across all tire brands are created equal. You will need to do some experimentation to find the best amount to use.

Caffelatex Kit How To 281kb (PDF)

How To Video: Caffelatex Tubeless Setup

Stephen demonstrates how to use a Caffelatex Tubeless Conversion Kit.

Watch on YouTube: http://www.youtube.com/watch?v=aeSnop0_-M8

Using the Caffelatex Injector with RVC Presta Valves

Using a RVC (Removable Valve Core) Presta valve is highly recommended. Remove the entire metal fitting from the end of the injector tube. Remove the valve core from the Presta valve. Next slide the tube from the Caffelatex injector directly onto the Presta valve.

Using the Caffelatex Injector with non-RVC Presta Valves

If using a non-RVC (non removable valve core) Presta valve simply attach the metal fitting on the end of the caffelatex injector tube onto the Presta valve.

If you are not removing the valve core mechanism, it is recommended to immediately inflate the tire with a pump after injecting the sealant through the valve. This cleans the valve internals.

Using the Caffelatex Injector with Schrader Valves

This injector also works with Schrader valves. Remove the Presta valve adaptor portion of the metal fitting (the first metal piece on the end of the injector tube). Then attach the metal fitting at the end of the Caffelatex injector tube on to the Schrader valve.

It is recommended to immediately inflate the tire with a pump after injecting the sealant through the Schrader valve. This cleans the valve internals.